This function is used to measure the tortuosity of a regularly sampled horizontal track. Tortuosity can be measured in a number of ways. This function compares the stretched-out track length (STL) over an interval of time with the distance made good (DMG, i.e., the distance actually covered in the interval). The index returned is (STL-DMG)/STL which is 0 for straightline movement and 1 for extreme circular movement.
Arguments
- track
Contains the animal positions in a local horizontal plane. The track parameter has a row for each position and two columns: northing and easting. The positions can be in any consistent spatial unit, e.g., metres, km, nautical miles, and are referenced to an arbitrary 0,0 location. track object cannot be in degrees as the distance equivalent to a degree latitude is not the same as for a degree longitude.
- sampling_rate
The sampling rate of the positions in Hertz (samples per second).
- intvl
The time interval in seconds over which tortuosity is calculated. This should be chosen according to the scale of interest, e.g., the typical length of a foraging bout.
Value
The tortuosity index which is between 0 and 1 as described above. t contains a value for each period of intvl seconds.
Note
This tortuosity index is fairly insensitive to speed so if track is produced by dead-reckoning (e.g., using ptrack or htrack), the speed estimate is not important. Also the frame of track is not important as long as the two axes (nominally called northing and easting) used to describe the positions are perpendicular.
Examples
BW <- beaked_whale
track <- ptrack(
A = BW$A$data, M = BW$M$data, s = 3,
sampling_rate = BW$A$sampling_rate,
fc = NULL, return_pe = TRUE
)$track
tortuosity <- tortuosity(track, sampling_rate = BW$A$sampling_rate, intvl = 25)